Cording and Piping Feet for Trims and Edges

Cording and piping feet have a channel or groove underneath that cradles a raised cord so your stitching lands right beside it, tight and straight. Piping feet are sized to common cord diameters, while multi-cord and couching feet guide one or several cords on top of the fabric for decorative work. The groove is the whole trick: it keeps the cord in place so you are not fighting it.

Match the groove size to your cord, or you get a loose, wandering line. A single-groove foot handles piping for cushions and bags, while a multi-groove or couching foot opens up decorative rows of yarn and cord across a surface. Both save the frustration of trying to sew snug against something round with a flat foot.

At a glance: how these compare

Details above come from the current product listings. We do not show pricing here because feed prices go stale fast, so check the retailer for what is current.

Foot Control & Cord 3/16" Groove Depth (395724-65) 033770217

This is a cording foot worth a look. Singer: Also fits some Sears Singer models. It comes into its own on the projects you sew again and again, where small friction adds up and the right tool removes it.

Note the size or spec the listing calls out and check it against what you already own so you are not buying a duplicate. It suits anyone who has hit the limit of improvising and wants the proper tool for the task; if you only touch this technique once a year, it can wait.

View on Sewing Machines Plus's Site →

Babylock Serger 5mm Cording Foot BLE8

The Baby Lock entry here is a cording foot. The cording foot controls threads so both hands can guide the fabric.Downloads Cording Foot Instructions Serging Foot Instructions. Lower the presser foot lever fully before you start, an easy thing to forget with an unfamiliar foot that then feeds badly.

It is aimed at the sewer who values a repeatable result over making do, which is most of us once a project matters. The common mistake is buying a foot that looks right but does not match the machine's shank or attachment system.

View on Sewing Machines Plus's Site →

5-hole Cording Foot - 494570-20B (ESG-CF5) (SA157)

The Brother entry here is a cording foot. This foot eliminates tangling to ensure that cords lie flat and perfectly parallel to each other. Anyone doing this technique regularly will wonder how they managed without it, while a one-time project might not justify the buy.

People tend to skip the test run and discover the fit or setting was off only after cutting into good fabric. Keep it near the tools you use in the same breath, since the time saved is in not hunting for the next thing.

View on Sewing Machines Plus's Site →

7-hole Cording Foot (ESG-CF7) (SA158)

This is Brother's take on a cording foot. This foot eliminates tangling to ensure the cords lie flat and perfectly parallel to each other. A common error is treating one tool as good enough for every fabric, when matching it to the material is the whole point.

Pair it with the supplies the technique assumes, because a tool without its companions only gets you halfway. It does its one task beautifully and nothing else, which is worth it only if that task is on your table often.

View on Sewing Machines Plus's Site →

3-hole Cording Foot (ESG-CF3) (SA148)

Brother offers this as a cording foot. Use this foot to create decorative stitching over cording on single and double layers of fabric. It slots into a larger setup, and the payoff is bigger when the rest of your kit is matched to it.

A specialty foot is narrow in purpose by design, so it sits idle between the projects that need it. Picture the moment you actually reach for it: mid-project, hands full, wanting the job done without a fight, and this is the piece that fits that gap.

View on Sewing Machines Plus's Site →

5mm Serger Cording Foot

This is Baby Lock's take on a cording foot. Baby Lock Cording Foot 5mm Serger Foot The Cording Foot allows you to attach thin cording, yarn, or ribbon neatly and precisely to sewing projects. It is more specialized than a general-purpose tool, so it wins on its task and sits idle the rest of the time.

Snap it on for the technique it is built for and a job that felt awkward with the standard foot suddenly runs straight and even. Keep it clean and stored properly and it will outlast several projects, since neglect ages tools faster than use does.

View on Sewing Machines Plus's Site →

Choosing what fits your sewing

Size the groove to the cord and let the foot hold the cord while you steer the fabric. Whether you are making piping for a cushion or couching yarn for texture, the right channel makes a wobbly job straight.